Electrically adjustable table frame Oslo-3

469,99 

Three-post professional height-adjustable frame for large and complex workstations. OSLO-3 is designed to ensure structural stability, even load distribution and undisturbed work area ergonomics, even in intensive use. The solution for architectural and corporate projects with high quality requirements.

Pay in three equal instalments 3 x 156.66€

epd logo
linergo made in europe
linergo 7 years warranty
linergo sustainable product
linergo low emission product

Product information

Stable, practical and reliable, the OSLO-3 electric height adjustable table frame is equipped with with 3 powerful electric motors, for quiet, smooth and even height adjustment. Designed for large L-Way surfaces. Equipped with anti-collision auto-stop system to prevent possible collisions. The 3-stage adjustable table legs provide a more stable and 33% faster height adjustment, as well as a 33% greater adjustment range compared to 2-stage leg frames. 2 memory mode min/max height positions can be set. Technical specification for the frame:
  • Surface: powder-coated. Stock colours: white RAL9016, black RAL9005, grey RAL9006
  • 3 powerful electric motors
  • 3 leg stages
  • Maximum lifting capacity with table top (even weight distribution over table top): 150kg
  • Lifting speed (depending on load): 32-40mm/s
  • Noise level: <38-48db
  • Min/max lift height (with table top 25mm): from 641mm to 1291mm.
  • Adjustment range: 650mm
  • Control panel with programmable memory for two (min/max) lowering and raising positions.
  • Equipped with automatic anti-collision braking system
  • Lifting leg pipe sizes: 80×60; 70×50; 60x40mm,
  • Reduced foot length makes it less difficult to move the chair
  • Adjustable feet for levelling the table on uneven floors (-0/+10mm)
  • The following rules must be observed when installing the table top:
  •  - Recommended tabletop width: 1400mm to 2000mm
  • - Recommended tabletop depth: 1200mm to 2000mm
  • Warranty: 7 years*
* Seller's warranty period (7 years) subject to all operating/use/warranty conditions. EN 527-2:2016 Office furniture - Office desks - Part 2: Safety, stability and functionality. Test method according to EN 1730 Furniture - Office desks - Part 2: Safety and security - Test method Electronic equipment - Conformity to RoHs, Reach, EMC Directive, UL962, CHINA RoHS
Maximum lifting capacity: 160kg
Supplied disassembled, assembly required
Equipped with 3 powerful electric motors
EPD declaration, EN-527 certificate

Engine system
Three ultra-powerful electric motors
Payload
Up to 160kg
Lifting speed
40 mm/s
Noise level
<48 dB
Standby power consumption
0,45 W
Anti-collision system
Integrated, built-in
Overload system
Integrated, built-in
Weight
44,0 kg
Lifting range
617-1267mm
Lifting range with 2.5cm thick surface
642-1292mm
Adjustment range
650mm
Leveling option for uneven floors
Leveling feet with 1-10mm adjustment
Material
High quality steel
Standard colours
White RAL9016, Grey RAL9006, Black RAL9005
Other special colours
Made to measure
Warranty
7 years
Certification
EPD Declaration, EN-527
Linergo OSLO 3 table ramis Transp.SKICE

linergo be green keep it on the screen
We try to avoid using unnecessary paper, so you won't find assembly instructions in the frame packaging. All the necessary documents are always found in this section. Be responsible for the environment!

What customers say about this product

Reviews

There are no reviews yet

Be the first to review “Elektriski regulējams galda rāmis Oslo-3”

Your email address will not be published. Required fields are marked *


Frequently asked questions

OSLO-3 is a professional-grade electrically height adjustable frame with a three-post design for extra-large and wide work surfaces. It is the solution for projects requiring an extended working area, high load capacity and stable mechanical performance over the entire adjustment range.

The three-leg architecture ensures even load distribution over large surfaces and additional structural rigidity. This allows wide L-shaped, U-shaped or extended linear workstations to be safely realised, while maintaining stability even at maximum heights. The solution is designed for projects with high technical requirements.

The OSLO-3 side feet are optimised with reduced length, while the central foot is without the long-foot design. This provides a freer area under the desk and reduces obstructions to the movement of the office chair, which is essential in dynamic working environments with large work surfaces.

Yes. OSLO-3 is designed for long-term and intensive use in professional work environments. The design ensures synchronised and precise height adjustment even under heavy and asymmetric loads, maintaining mechanical stability in the long term.

OSLO-3 is a specialised frame for large workstations and individually configured projects. It is suitable for architects and office designers requiring structural flexibility, load-bearing capacity and consistent quality across multiple workstations. A 7-year warranty confirms its suitability for long-term professional use.

Related products

Filters
Price range
Price range